Maximum/Minimum Caliper

Updated November 5, 2022

Applies to : Sheetfed, Web, Business Forms, Flexo, Digital Press Types

The user can set the Minimum and Maximum Caliper thickness of material that can be used on the Press Type.

 

 

The comparison will allow the user to enter material with a caliper up to the minimum or maximum. For example; entering a Maximum Caliper of 0.010 will ALLOW the material to have a Caliper of 0.010.

 

This will prompt the user when saving a component with material that is either too thick or too thin to be used with the press. It will, however, allow the user to calculate the cost from within the component.